In order to be protected from harmful and contagious diseases, water tanks need maintenance in certain processes. Human health may be affected due to rust, sludge and harmful microorganisms contaminating drinking water in water tanks. Corrosion, pollution and waste water can be seen in Plastic Water Storage Tanks that have not been maintained for a long time.
Diseases such as cholera, diarrhea and typhoid, which have negative effects on human health, may occur in water tanks where cleaning processes are not carried out. We wash our food and take a shower without realizing that the water tanks are getting dirty. Thus, providing an opportunity for the transmission of diseases.
Even if the water going to the water tank goes through a certain network and various processes, the water in the tank tends to get dirty over time. In addition, the formation of cracks in the lid and on some part of the water tank are not repaired, it may bring many negative outcomes. In order to avoid these negative outcomes, it is very important to clean the water tanks periodically.
The Cleaning Process of Water Tanks
The cleaning period of the water tanks takes place every 6 months. Even if the water in the water tanks passes through the network using certain treatment techniques, maintenance is mandatory. First of all, it is necessary to pay attention to cleanliness and maintenance for human health. Click here for water tank cleaning procedures.
Water tank cleaning steps:
- The water must be completely drained in order to carry out tank cleaning process.
- Inside of the tank should be clearly visible.
- The dirt formed at the bottom of the tank should be cleaned.
- Microorganisms should be eliminated by making cleaning mixtures.
- After the cleaning, the water tank can be filled and its lid is should be closed.
- Appropriate amount of chlorine should be added to the water and this chlorine should be measured regularly.
Water Tank Disinfection Methods
The list of methods used in water disinfection is as follows;
- Boiling methods.
- Chlorination methods.
- Disinfecting processes with ozone.
- Disinfecting with ultraviolet.
- Disinfecting with iodine.
- Disinfecting processes with potassium permanganate.
Plastic Water Tank Cleaning
- The outlet valve should opened and the water inside the tank should be removed.
- A mixture should be prepared for cleaning.
- The inner parts of the water tank are thoroughly rubbed. Every small detail of the water tank should be cleaned.
Stainless Water Tank Cleaning
For the stainless water tank, all of the water in the tank must be drained. After that, the inside of the tank must be cleaned with appropriate chemicals. With the help of water, the inside of the tank must be washed abundantly.
Large Water Tank Cleaning
For cleaning all water tanks, it is a priority to drain the water completely. Every part of the tank should be illuminated so that the tank can be cleaned in detail. In addition, all harmful substances must be eliminated by using a chemical mixture.
Galvanized Water Tank Cleaning
Galvanized water tanks are tanks with metal alloys. Before cleaning the galvanized water tank, the existing water in the tank should be drained. Dirty water should be drained into manholes or sewers.
ULV Atomizer Method in Water Tank Cleaning Processes
ULV atomizers can be used during the cleaning of the water tank. With these methods used in disinfection processes, there will not be an untouched area in the water tank and every area of the tank will be cleaned.
Adding Chlorine to The Water Tank
Chlorine must be added into water tanks by a certain system and not by hand or measuring. Minimal level of chlorine must be sent to the tank through this system. Thanks to the chlorine added into the water tank, the breeding time of bacteria is prolonged, thus ensuring a healthier use of water. Click here for water tanks.
Modular Water Tank Cleaning
Cleaning of such water tanks should be done once a year. The water in the tank is drained by the emptying methods. The cleaning of the tank should be carried out with substances consisting of chemical mixtures. However, it is not recommended to use too much as chemical substances can give odor to the water.